Multi-Tech Systems MT2456SMI22 - Manual (Page 11)

Chapter 4 - V.22bis Commands
Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide 11
Error Control and Data Compression Commands
+ESR Select Repeat
\B Transmit Break to Remote
\K Break Control
Synchronous Access Mode Commands
+ESA Configure Synchronous Access Submode
+ITF Transmit Flow Control Thresholds
Fast Connect Command
$F Fast Connect Control
Line Side Device Commands
-TTE Threshold Adjustments for Telephony Extension
-TRV Tip and Ring Voltage Measurement
A Note About Compatibility Commands
You may notice that some commands are available but do not support any function. These commands exist for
compatibility purposes only. If you enter these commands, you may receive an OK result; however, no changes
are made to the configuration or control of the modem. Examples of these commands are:
Y, &S, &V1, +VDT, and \A,