Multi-Tech Systems MT2456SMI22 - Manual (Page 58)

Index
Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide 58
–STE= - Set Telephony Extension , 25
Synchronous Access Mode Commands , 31
T - Set Tone Dial Default , 22
Table of Result Codes , 16
Table of Supported V.80 Commands , 20
-TRV – Tip and Ring Voltage Measurement , 34
-TTE - Threshold Adjustments for Telephony Extension ,
34
W - Connect Message Control , 15
X - Extended Result Codes , 16
Z - Soft Reset and Restore Profile , 12
V.22bis S-Parameters , 35
V.22bis S-Registers
Result Codes , 45
S0 - Number of Rings to Auto-Answer , 37
S1 - Ring Counter , 37
S10 - Lost Carrier To Hang Up Delay , 38
S11 - DTMF Tone Duration , 38
S12 - Escape Prompt Delay (EPD) , 38
S14 - General Bit Mapped Options Status , 38
S16 - Test Mode Bit Mapped Options Status , 39
S19 - Reserved , 39
S2 - Escape Character , 37
S20 - Reserved , 39
S21 - V.24/General Bit Mapped Options Status , 39
S22 - Speaker/Results Bit Mapped Options Status , 40
S23 - General Bit Mapped Options Status , 40
S24 - Sleep Inactivity Timer , 40
S25 - Delay To DTR Off , 40
S26 - RTS to CTS Delay , 40
S27 - Bit Mapped Options Status , 41
S28 - Bit Mapped Options Status , 41
S29 - Flash Dial Modifier Time , 41
S3 - Carriage Return Character , 37
S30 - Disconnect Inactivity Timer , 41
S31 - Bit Mapped Options Status , 41
S36 - LAPM Failure Control , 42
S37 - Desired Line Connection Speed , 42
S38 - Delay Before Forced Hang Up , 42
S39 - Flow Control Bit Mapped Options Status , 42
S4 - Line Feed Character , 37
S40 - General Bit Mapped Options Status , 42
S41 - General Bit Mapped Options Status , 43
S48 - V.42 Negotiation Action , 43
S5 - Backspace Character , 37
S7 - Wait Time for Carrier, Silence, or Dial Tone , 37
S8 - Pause Time For Dial Delay , 38
S82 - Break Handling Options , 43
S86 - Call Failure Reason Code , 43, 44
S9 - Carrier Detect Response Time , 38
S95 - Extended Result Codes Control , 44
Summary of S-Parameter Defaults , 36
Summary of S-Parameter Definitions , 37
W - Connect Message Control , 15
X - Extended Result Codes , 16
Z , 12