Philips Magnavox 25i - Manual (Page 11)

11
H
OW TO
U
SE THE
T
UNER
M
ODE
C
ONTROL
Tuner Mode
Auto
Tuner Mode
Cable
1 2 3
4 5 6
7 8 9
0 A/CH
POWER
CC
STATUS
EXIT
SLEEP MUTE
MENU
CH+
CH–
VOL+
VOL–
Brightness
+ –
Install
Language
English
Tuner Mode
Antenna
1
4
2
6
2
4
5
3
T he TUNER MODE control allows
you to change the TV’s signal input
to either ANTENNA, CABLE or AUTO
mode. It’s important for the TV to know
what type of signal to look for (either
Cable TV signal or a normal Antenna
signal). In the AUTO mode, when the
AUTO PROGRAM feature is activated,
the TV will automatically choose the
correct mode.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the INSTALL
control appears on the screen.
Press the CURSOR RIGHT ᮣ
button to display the LANGUAGE
control.
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the TUNER MODE control
appears on the screen.
Press the CURSOR RIGHT
ᮣ
button to select either ANTENNA,
CABLE, or AUTO mode.
When finished, press the STATUS
/EXIT button to remove the on-screen
menu from the TV screen.
When CABLE is selected,
channels 1-125 are available.
When ANTENNA is selected, channels
2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode (based on the type of signal it
detects when the AUTO PROGRAM
feature is activated).
S MART H ELP