Minolta CF2001P - Manual (Page 104)

Troubleshooting 6
CF2001P 6-1
6 Troubleshooting
6.1 Improving Print Quality
Symptom Cause Action
The image is too light. The setting in the printer driv-
er is not set properly. Adjust the setting in the print-
er driver to the desired level.
The paper loaded in the tray
is damp. Replace the old paper with
fresh dry paper. p. 4-7
The toner hopper is running
out of toner. Refill the toner. p. 5-8
The imaging unit may be
defective. Contact your tecnical
representative.
The image transfer belt unit
may be defective. Contact your tecnical
representative.
The image is too dark. The setting in the printer driv-
er is not set properly. Adjust the setting in the print-
er driver to the desired level.
The imaging unit requires
replacement. Contact your tecnical
representative.
The image transfer belt unit
requires replacement.
The toner smudges. The image transfer roller unit
requires replacement. Contact your technical
representative.
The oiling roller requires re-
placement.
Partial void image The paper loaded in the tray
is damp. Replace the old paper with
fresh dry paper.
The imaging unit requires re-
placement. Contact your technical
representative.
The image transfer belt unit
requires replacement.