Minolta CF2001P - Manual (Page 32)

Before Making Prints 3
CF2001P 3-5
* When Fiery X3e is installed, printing from the manual bypass tray is not supported.
No. Part Name Description
1 Print output tray Holds printouts fed from the printer
2 Toner supply door Opened when adding toner
3 Front door Opened when servicing the printer.
4 Tray 1 Holds 250 sheets of paper
The paper size can be adjusted freely.
Special paper can be used. See p. 4-7.
5 Tray 2 Holds 500 sheets of paper
The paper size can be adjusted freely. See p. 4-12.
6 Power switch Used to turn the printer on and off
See p. 3-14.
7 Right-side door Opened when servicing the printer and clearing misfeeds
8 Right-side door release
lever Used to open and close the right-side door
9 Manual bypass tray* Used for manual feeding of paper
The paper is fed one sheet at a time
10 Lower right-side door Opened when clearing misfeeds
11 Left-side door Opened when servicing the printer
12 Control panel Displays the current status of the printer
13 Printer power cord
socket Used for connecting the printer’s power cord
14 Sorter/finisher connec-
tor Used for connecting the sorter or finisher hookup cord