Motorola SATELLITE 9505 - Manual (Page 127)

Using Calling Features 123
+
Viewing Signal Strength
Satellite Mode Use this feature to check the strength of the signal
that your phone is receiving from the Iridium
satellite network.
1. Follow the steps in “Getting to Call Related
Features...” to get to Show Signal Strength .
2. Press
O
to select. You will see Checking
Signal... .
If the antenna is not rotated, you will see
Rotate and Extend Antenna . Rotate and extend
the antenna to continue.
The signal strength indicator is located in the
upper left corner of the display:
rx
Signal strength is sampled every four to five
seconds; the indicator shows the average
strength for the last three samples. The more
segments displayed in the bar graph, the
stronger the signal. Five bars indicate full
signal strength. The indicator shows the
tower icon but no bars when the signal is
weak.
3. Press and hold
C
to exit the menu.
Cellular Mode This feature is not available in cellular mode.