Motorola SATELLITE 9505 - Manual (Page 70)

66 Using In-Call Features
r
Sending a Phone Flash
Satellite Mode
Cellular Mode
(GSM 900/1800)
(GSM 900)
This feature only applies to TDMA or CDMA cellular
mode.
Cellular Mode
(TDMA 800/1900)
(CDMA 1900)
(CDMA/AMPS)
Many TDMA and CDMA cellular network features
(for example, call waiting, call holding, call
forwarding) require you to send a “phone flash”
over the air during a call to access them. This is
similar to when you press the switch hook on your
conventional phone in your home or office to switch
between calls. The phone flash alerts the network
that you want to use a particular network feature.
Your service provider will provide you with the
appropriate codes to send with the phone flash for
the features to which you have subscribed.
To send a phone flash:
1. Press
M
while you are in a call. You will see
Flash Options followed by Select? .
2. Press
O
. You will see Send Flash? .
3. Enter the access code for the feature you
want to access, if necessary, and then
press
O
to send the flash.
or
Press
C
to cancel the flash.