Maxtor QSNDVR9M - Manual (Page 50)

3.2.5 SETUP-NETWORK (Fig 3.2.27 Setup network)
TYPE:
STATIC: Static IP address. Push “Up” “Down” “left” “Right” buttons to move the cursor among the
digits and push ADD or DEC key to modify the IP address. (Fig 3.2.28 Setup static IP).
DYNAMIC: Dynamic IP address. Press ENTER key to display the menu, the system will display
“Please wait” for a while. Then, the IP address which is assigned by network will be displayed on the
screen. If the DVR failed to connect to the network, it will display the information below
DHCP SETTING FAIL
CHECK YOUR NETWORK
Page 52