Maxtor QSNDVR9M - Manual (Page 53)

Port 1 is used for logon;
Port 2 is used for controlling the DVR;
Port 3 is used for live surveillance;
Port 4 is used for backup;
Port 5 is used for playing back.
NET CLIENT ID: The default ID is “NetUser”, the user can set other four IDs and passwords for
viewing through the network. (Fig 3.2.31 Net client ID).The login-ID and the password are composed of t
letters or numbers at random. Only the ID set here or the default ID can be used in the remote viewer. The
administrator can restrict the other users to remote viewing through the internet with this configuration
setup.
NET DVR ID: The identification of the DVR. You can edit it at will, it can be composed of numbers,
letters, and symbols.
NET CLIENT ADDR (address) (Fig 3.2.32 Net client address): Fill in these options with the
network information needed. Use the “Up” “Down” “Left” “Right” buttons and ENTER key to fill the blank.
“<000.000.000.000>” means that any IP address can access the DVR through network. The user can set up
ten IP addresses as restricted IPs to access the DVR.
Page 55