Operating netcommand-controlled devices, continued – MITSUBISHI ELECTRIC 737 User Manual
Page 49
5. NetCommand IR Control (837 Series)
49
Key Name in
Learning Screen
Special Operation Description and Setup
How to Use
Enter
ENTER-Key Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand
uses the same
ENTER key for both operations.
When
ENTER has a menu or guide function or
when the original remote control uses the same
key for menus and channel selection:
Learn the
ENTER, SELECT, or OK key in the
NetCommand
Enter learning position.
Press
1.
MENU or GUIDE to display the device’s
menu or guide.
Press
2.
ENTER within the menu and
NetCommand will send the
Enter signal for
menus.
Enter (digits) When ENTER is for channel changes, i.e., the origi-
nal remote control has a separate
ENTER key for
this function):
Learn the
ENTER key for channel selection in
the NetCommand
Enter (digits) learning posi-
tion. Use this learning position only if the original
remote control has separate keys for
Enter in
menus and
Enter for channel selection.
Press digit key(s) and then press
ENTER.
NetCommand will send the
Enter signal for
channel selection.
Cancel
CANCEL as the Cancel or Exit Function
“Learn” the
Cancel or Exit function in the
NetCommand
Cancel learning position
Press
1.
MENU or GUIDE to display the menu or
guide.
Press
2.
CANCEL and NetCommand will send
the
Cancel or Exit signal.
—
(separator)
The symbol “—” can serve as the separator
between a digital channel’s main and sub-channel
digits, e.g., digital channel 12-1 (main channel is
12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand
– (separator) learning position.
Press digit key(s) and press
CANCEL.
NetCommand will send the channel-separator
signal.
The MORE Key Menu and NetCommand
Perform NetCommand setup for these device-specific
keys and then access their functions with the
MORE key.
Device
Key
VCR
Cable/
SA
T
DVD/
DVR
A/V
Receiver
Menu
Input
SP/EP
List
On Demand
A
B
C
D
Device
Key
VCR
Cable/
SA
T
DVD/
DVR
A/V
Receiver
Top Menu
Angle
Audio (DVD)
Subtitle
Repeat
Bonus View
Setup
Surround
Night
Operating NetCommand-Controlled Devices, continued