MITSUBISHI ELECTRIC 737 - Manual (Page 7)

7 Basic Setup and Operation
1
Before You Begin
Review the important safety, installation, and oper- 1.
ating information at the beginning of this book.
Choose a location for your TV.
2.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV
as well as shortened lamp life.
• Avoid locations where light may reflect off the
screen.
• See the stand requirements on page 2.
Install the batteries in the remote control. 3.
Plug the TV into an AC power outlet.
4.
First-Time Power-On
Confirm that the remote
1.
control is in TV mode.
Press the side button •
once to light the mode
indicator and confirm
that
TV mode is active.
To change, press the •
side button additional
times to activate
TV
mode.
GUIDE MENU INFO BACK
TV
Aim the remote control
2.
at the TV and press the
POWER key
. Wait for the
Welcome screen.
GUIDE MENU INFO BACK
Press 3. if you wish to
change the menu language
to
Español.
Press
4.
to highlight EXIT .
Press ENTER to clear the
menu.
1. Remote Control
2. Two AA Batteries
3. Basic Owner’s Guide
4. HDTV Quick-Setup Guide
5. Product Registration Card
AA
AA
2
3
4
GUIDE MENU INFO BACK
ACTIVITY
1
5
Package Contents
Please take a moment to review the following list of
items to ensure that you have received everything.
Remote Control Batteries
Remove the remote control back cover. 1.
Emitter bulb
Load the batteries, making sure the polarities 2.
(+) and (-) are correct. Insert the negative (-)
end first.
Slide the cover back into place. 3.