MITSUBISHI ELECTRIC 737 - Manual (Page 17)

2. TV Connections 17
HDMI Device
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel to the
HDMI device output. HDMI devices provide video and
audio through the single cable.
Mitsubishi recommends you use category 2 (high-
speed) HDMI cables to connect HDMI 1.3 source
devices. High-speed category 2 cables bring you the
full benefits of Deep Color and
x.v.Color. See “HDMI
Cable Categories” on the opposite page for more on
HDMI cable types.
1 2 3
HDMI
AVR
AUDIO
OUTPUT
L
R
Pb Y/ VIDEO Pr
Pb Pr
INPUT
2
INPUT
1
DIGITAL
AUDIO
OUTPUT
DVI/PC
AUDIO (480i / 480p / 720p / 1080i) L R
L R
INPUT AUDIO
Y/ VIDEO
3D
GLASSES
EMITTER
ANT
RS-232C
IR- NetCommand
Output R
1 2 3
HDMI
AUDIO
R L
Any HDMI
device
HDMI-to-HDMI
cable
TV main
panel
IMPORTANT
HDMI and Audio Signals
Digital Surround Sound: The TV’s HDMI inputs
can receive digital stereo audio signals only. To
hear digital surround sound from an HDMI device,
connect the device’s HDMI or digital audio output
directly to your A/V receiver. See the Owner’s
Guides for those devices for instructions.
Y Pb Pr Component Video Device
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
If your source device has an HDMI output, use the
connections for HDMI devices described on this page
instead of component video..
Required:
RCA-type component video cables
Left/right analog audio cables.
Note: To hear digital surround sound, connect the digital
audio output from the device directly to your digital
A/V receiver.
1 2 3
HDMI
AVR
AUDIO
OUTPUT
L
R
Pb Y/ VIDEO Pr
Pb Pr
INPUT
2
INPUT
1
DIGITAL
AUDIO
OUTPUT
DVI/PC
AUDIO (480i / 480p / 720p / 1080i) L R
L R INPUT AUDIO
Y/ VIDEO
3D
GLASSES
EMITTER
ANT
RS-232C
IR- NetCommand Output R
Pb Pr Y/ VIDEO
– AUDIO –L R
Pb Pr Y/ VIDEO
– AUDIO –L R
Pb Y Pr
AUDIO
L R
Incoming from
cable service or
satellite dish
Component video
device
TV main panel
Audio
cables
Component
video cables
CABLE IN or
SATELLITE IN