Miele W3033 - Manual (Page 8)

The appliance must be correctly
installed and connected before the
first use. Please see the "Installation
instructions."
Running a spin cycle before the first
use is, for safety reasons, not possible.
To activate the spin cycle a wash
program must be run
without laundry
or detergent .
^ Turn on the water supply.
The Welcome screen shows once the
washer is turned on for the first time.
The Welcome screen will not show
after the washer has run for more than 1
hour.
The display now shows the language
setting.
Setting the display language
The default setting for the display
language is
German . The display
language can be adjusted.
Language
english
+ OK
^ Select the desired language by
pressing the left menu button "
+".
Confirm the setting with the right
"
OK" button.
Shipping strut reminder
The shipping struts must be
removed before the first use to avoid
machine damage.
^ Confirm that the shipping struts have
been removed by pressing "OK".
The washer is now ready for the first
use.
Starting the first wash program
Select program
^ Press the program button "Sanitize".
^ Press the "Start" button.
Once the program has finished the first
use is complete. The washer can be
used.
Before using for the first time
8