Miele CVA4075 - Manual (Page 42)

Froth dispenser/Intake hose
Clean the froth dispenser after each
use, otherwise they may become
blocked with dried milk and hard to
clean.
Rinsing does not replace cleaning in
the dishwasher.
^ Select "Care".
^ Select "System rinse".
^ Set a glass with water under the
intake hose and select "OK".
The intake hose takes in the water and
rinses it.
Cleaning in the dishwasher
To clean the froth dispenser in the
dishwasher, take the parts from the
machine. Regular cleaning in the
dishwasher is important, so that the
froth dispenser does not clog over time,
when milk is not removed during
rinsing.
^ Turn the cover above the spout to the
left, a.
^ Pull the froth dispenser out of the
machine, b, holding it by the spout
and the intake hose.
^ Pull all pieces apart. Remove the
piece with the gaskets by turning and
pulling it apart.
^ Insert the pieces in the dishwasher
and then lubricate the gaskets with
the supplied silicone grease.
Take care that the small holes of the
single pieces are not clogged (see
arrow).
Pinch the soft parts to loosen the
soiling, then blow them out.
Do not use a needle to remove
residues, the parts may get
damaged.
Cleaning and Care
42