Miller Electric Engine-Driven Welder/AC Generator - Manual

Processes
Stick (SMAW)
Flux Cored (FCAW)
MIG (GMAW)
DC TIG (GTAW)
Non-Critical AC TIG (GTAW)
Air Carbon Arc (CAC-A) Cutting
and Gouging (3/16 in carbons)
Air Plasma Cutting and Gouging
with optional Spectrum models
Applications
Generator Power for:
Farm or Home Backup
Pivot Irrigation Systems
Pumps
Conveyors
Welding:
Farm Equipment Repair
General Maintenance
Fabrication
Quick
Specs
Bobcat
™
3 Phase
Engine-Driven Welder/
AC Generator
Issued January 2008 • Index No. ED/4.33
Generator Power Output Rated at 104˚ F
3-Phase: 11,000 Watts Peak, 10,000 Watts Continuous
1-Phase: 10,500 Watts Peak, 9,500 Watts Continuous
Output Range
For Stick/TIG: 50 – 225 Amps For FCAW/MIG (CV): 19 – 28 Volts
Weight 540 lb (245 kg)
Fastex ™ tool-free oil drain
system combined with hour
meter makes service a snap.
Heavy-duty construction! Engine,
generator barrel, electrical switches
and other components are protected
against accidental impact.
More horsepower — 23 HP gas/
25 HP LP Kohler
® provides more
power for demanding weld and
generator loads.
Reliable Bobcat engine-driven
welding generators are the
industry standard for quality and
value. Multiprocess weld output,
strong generator power, and most
important — rated #1 in reliability,
make the Bobcat the welding
industry’s most popular choice.
Accu-Rated ™ 11,000 watts (peak),
480 V, 3-phase power for running
pivot irrigation systems, or
emergency backup power for
milking pumps and other motors.
Accu-Rated ™ 10,500 watts (peak),
120/240 V, 1-phase output provides
plenty of power to run power tools,
lights or emergency backup power
for your barn or home.
Patented 12-gallon “smart” fuel tank has a
reservoir design that minimizes the chance of
fuel backflow. Large capacity means more
running time before refueling. Fuel sight
gauges are on both sides.
The Power of Blue ® .
Total Parts Coverage Welder/generator and engine are
warranted for 3 years, parts and labor. Engine is warranted
separately by the engine manufacturer.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Accu-Rated ™ – Not Inflated
Generator Power
Ten-degree skewed-rotor design boasts better generator
performance.
See page 3 for more information.
Exclusive! High-Impact Protective
Armor
• Protective armor with receptacle
and output stud covers provides
a virtually indestructible barrier
from damage
• High-impact resistance in all
temperatures
Other applications include:
automotive bumpers, tractor hoods
and panels, lawn mower decks,
large structural parts, etc.
Output stud and receptacle covers required by OSHA
and CSA for job site safety.
Front Panel Fuel Gauge!
LP Option!
Fully Enclosed Case!