Miele 05 620 661 - Manual (Page 30)

Power outlet
The power outlet for the appliance must
be installed within a cabinet, on a wall
adjacent to the undercounter space in
which the dishwasher is located. An o-
pening through the partition between
the compartments of 1
1
/
2
" (3 to 4 cm)
can be made to allow the plug to pass
through.
Permanent Connection (Hard Wiring)
For hard wiring, the power cord must
be disconnected from the terminal box
located at the lower left front of the
dishwasher, behind the toekick and
service panel. Pass the permanent
power supply cable through the strain
relief and secure it to the terminal box.
Connect:
L1 (Black) to L on terminal block
N (White) to N on terminal block
GRND to ground connector
GROUNDING INSTRUCTIONS
This appliance must be connected
to a grounded metal, permanent
wiring system, or an equipment
grounding conductor must be run
with the circuit conductors and con-
nected to the equipment grounding
terminal or lead on the appliance.
Use copper conductors only.
,
Hardwiring the dishwasher
should only be done if required by
local electrical codes, and then in
accordance with those codes.
Do not cut the plug off the power
supply cord and connect it directly
to the house wiring.
Installation
30