Chapter 1 - system configuration – Musica CRW4260tx User Manual
Page 12
Chapter 1 - System Configuration
4
Chapter 1 - System Configuration
In order to use the CRW4260tx, you will require the following.
Computer
The following operating environment is required:
•
An IBM/AT compatible computer with a 100 MHz or faster Pentium
CPU (in order to write at 4x speed), or a 100 MHz or faster 486
CPU (in order to write at 2x speed)
•
A vacant slot in which to install a SCSI card or a pre-installed
SCSI card
•
Windows 3.1, Windows 95, Windows NT4.0 or Higher
•
Sufficient hard disk space
Note:
You will need about twice as much space on your hard disk as that
required by the data you wish to write to CD-ROM.
SCSI card
This is required in order to connect a SCSI device (the Yamaha
CRW4260tx) to your computer.
We recommend the following:
Adaptec SCSI cards: AHA-2940 (PCI), AHA-284x (VL), AHA-2740
(EISA), AHA-154x (ISA), etc.
Software
Use writing software or packet writing software which supports the
CRW4260tx.