Musica CRW4260tx - Manual (Page 14)

Chapter 2 - Touring Around CRW4260tx
6
Chapter 2 - Touring Around CRW4260tx
Rear Panel
1 AC IN
Connect the included power cable here.
2 CDR ID
Use this switch to set a unique SCSI ID number for the CRW4260tx.
3 TERMINATOR
This switch is used to set termination. Refer to the terminator setting
section for details.
4 LINE OUT (L, R)
These jacks are used to output audio to the amplifier.
5 SCSI-1, SCSI-2
These connectors are used to connect the CRW4260tx in the SCSI
daisy chain.
4 1 2 3
AC I N
1
SCSI-1
SCSI-2
LINE OUT
CDR ID
L R
TERMINATOR
OFF ON
5