Mio MioMap v3.3 C320 - Manual (Page 11)

3 Operating MioMap (Controls)
MioMap is designed for easy operation. All controls are operable by fingertips.
Wherever possible, pushbuttons and lists are provided to make accessing functions
or changing settings as easy as possible.
3.1 Hardware buttons
There is only one hardware button on your MioMap v3.3. Please, refer to the
provided Hardware User's Manual for more details.
The majority of the MioMap functions can be accessed using the touch screen. The
hardware buttons are the following:
3.1.1 Power on/off
Use this button to turn the power of the MioMap v3.3 on or off any time.
The behavior of the device depends on how long you tap the button:
Standby: If you tap this button shortly the device power will turn off, but the system
is not shut down. If the device power is turned off while MioMap is running, when you
turn the device back on, MioMap will continue the navigation as soon as the built-in
GPS determines the location again.
If you tap this button for longer (appr. for 5 seconds) a new screen appears and you
can choose between two options:
Shutdown: this will shut down and turn off the device. When you turn the device
back on, you need to restart the navigation program.
Restart: this will shut down and restart the device. When finished, you need to
restart the navigation program.
In all three cases, while the device is switched off, the GPS will not work, no position
will be calculated, track log will not be saved, and navigation will stop.
11