Mio MioMap v3.3 C320 - Manual (Page 38)

that belongs to a via point, the route is colored only up to that via point. The rest of
the line remains gray.
4.5.1.2 Distance Left
This is the distance you need to travel on the route before reaching your final
destination.
If via points exist, tap and tap again any of the fields to see the distance to reach the
first, second, etc. via point.
4.5.1.3 Method
This field shows how the route was calculated. It either displays the ‘Route’ or the
‘Vehicle’ field from the Route parameter settings. If you have chosen Car, Taxi or
Bus, the type of the route (Fast, Short or Economical) will be displayed here; if you
have selected Emergency, Bicycle or Pedestrian, this information will be displayed
here.
4.5.1.4 Time Left
This is an estimated value. It shows the time needed to reach the final destination of
the route based on information available for the remaining segments of the route.
The calculation cannot take into account traffic jams and other possible delays.
If via points exist, tap and tap again any of the fields to see the time needed to reach
the first, second, etc. via point.
4.5.1.5 Estimated Arrival
This is an estimated value. It shows the estimated arrival time at the final destination
of the route based on information available for the remaining segments of the route.
The calculation cannot take into account traffic jams and other possible delays.
If via points exist, tap and tap again any of the fields to see the estimated arrival at
the first, second, etc. via point.
4.5.1.6 Destination / Via point
This field shows the exact address (or its coordinates if the address is not available)
of the final destination.
If via points exist, tap and tap again any of the fields to see the address or
coordinates of the first, second, etc. via point.
4.5.2 Warning icons
The following 5 squares are normally gray. Some of them turn red and show a
graphical symbol in case warning(s) are attached to the planned route. These are
38