Mio MioMap v3.3 C320 - Manual (Page 77)

Your options are:
• Recalculate: MioMap will recalculate the route with the previous settings. The
result is the same as if Automatic recalculation was selected.
• Drop Next Via Point / Delete Route: MioMap will remove the next via point from
the list and recalculate the route without it. If you have only one target left, the
label of the button will be Delete Route, and it will end navigation.
• Bypass: if you have deviated from the original route because of a traffic jam or
roadworks, you can instruct MioMap to avoid the original route for a specified
distance.
• Cancel: you can exit without recalculating the route. Navigation stops and will be
activated again when you find your way back to the original route.
6.1.8.3 Disabled
If you stick to the original route, and you wish to get back to it on your own, you can
disable recalculation. This way guidance will stop until you return to the
recommended route on your own.
6.2 Sound settings
Settings on this page determine the way MioMap sounds.
6.2.1 Master sound volume/switch
The loudness of MioMap is independent of your PNA settings. When you run
MioMap, the position of this fader determines the device volume level. When you exit
the program, the device settings return.
The left part of this control works as a mute button. Tap to mute all MioMap sounds.
77