Maxtor DIAMONDMAX 21 PATA STM3300620A - Manual (Page 46)

40 DiamondMax 21 PATA Product Manual, Rev. B
Identify Device command 32
Idle 30
Idle and Standby timers 15
Idle Immediate 30
Idle mode 15
Idle mode power 13
IEC950 20
Information Technology Equipment 20
Initialize Device Parameters 30
interface 11
,
29
interface signals 29
interference 21
internal data-transfer rate OD 11
ISO document 7779 18
J
jumper settings 25
K
Korean RRL 21
L
LBA mode 10
length 11
logical geometry 10
M
maintenance 20
master 25
master/slave 1
Master/slave configuration 25
maximum temperature 16
Mean Time Between Failures 20
measurement locations 16
modes 29
monitoring 1
mounting the drive 23
,
26
MTBF 20
N
noise 14
nominal power 3
nonoperating shock 17
nonoperating vibration 17
Nonrecoverable read errors 20
O
operating power and current 13
operating shock 17
operating vibration 17
orientation 26
P
physical characteristics 11
pins 29
PIO 29
power consumption 13
power dissipation 13
power management 15
power specifications 13
power-management modes 15
Power-on to Ready 12
power-on-hours 20
precautions 26
programmable power management 15
R
radiated RF immunity 19
radio and television interference 21
radio frequency 19
random track location 13
Read Buffer 30
Read DMA 30
Read DMA Extended 30
Read DMA without Retries 30
read errors 20
Read Log Ext 30
Read Multiple 1
,
30
Read Multiple Extended 30
Read Native Max Address 30
Read Native Max Address Extended 30
Read Sectors 30
Read Sectors Extended 30
Read Sectors Without Retries 30
Read Verify Sectors 30
Read Verify Sectors Extended 30
Read Verify Sectors Without Retries 30
read/write power and current 13
Recalibrate 30
recording and interface technology 11
recording density 11
recording heads 1
recording method 11
register 35
relative humidity 16
reliability 20
resistance 14
resistive load 14
RF 19
RoHS 22
S
S.M.A.R.T. commands 36
S.M.A.R.T. Disable Operations 31
S.M.A.R.T. drive monitoring 1
S.M.A.R.T. Enable/Disable Autosave 31