Minuteman UPS UPS - Manual (Page 14)

13
BATTERY REPLACEMENT PROCEDURE
PLEASE READ THE CAUTIONS BEFORE ATTEMPTING TO REPLACE THE
BATTERIES
Hot-swappable batteries mean that the batteries can be replaced without
powering down the whole UPS system.
NOTE: If there is a power interruption while replacing the hot-swappable
batteries, with the UPS on, the load will not be backed up. To
hot-swap the batteries start with step number 5.
1. Turn off the equipment that is plugged into the output receptacles of the
UPS.
2. Press and release the ON/OFF button on the front panel to turn the UPS
OFF.
3. Unplug the UPS's AC power cord from the AC outlet.
4. Unplug the equipment from the output receptacles of the UPS.
5. Remove the front panel of the UPS.
6. Lay the front panel on top of the UPS.
7. Remove the two retaining screws and the battery retaining bracket.
English
S 700 S 1000 S 1400
Battery
Model #
2-12V7Ah 2-12V12Ah 2-12V17Ah
S 2000
2-12V17Ah
SmartSine
Model #
Replace batteries with the same number and type as originally
installed in the UPS. These batteries have pressure operated vents.
These UPSs contain sealed non-spillable lead acid batteries. CAUTION:
B.B. Part #
CSB Part #
BP7-12 BP12-12 BP12-17
GP1272 F2 GP12120 F2 GP12170 B1
BP12-17
GP12170 B1
Yuasa Part # NP 7-12 NP 12-12 NP 17-12 NP 17-12