Multiquip Reversible Plate Compactor MVH-200DA2 - Manual (Page 19)

MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (01/27/06) — PAGE 19
Lifting:
1. Use a crane or lift to load and unload the machine. A skilled
crane operator is required to perform the job.
2. When lifting the machine, check for any damaged or loose
bolts, lifting hooks, and shock mounts.
3. Check any damaged or loose bolts in the guard frame to
avoid machine sliding off.
4. Make sure that the machine is shut off before machine is
lifted.
5. Use reliable cable for lifting.
6. Always lift the machine vertically and keep the machine away
from workers and animals.
7. Do not lift the machine higher than the required height.
MVH-200DA2 — OPERATION
Stowing the Handle:
1. Push up the handle (Figure 15).
2. Pull the stopper grip upward into the hole of the guard frame
to lock the handle.
Figure 15. Stowing the Handle
Transporting:
1. Always make sure that the machine is shut off while being
transported.
2. Check that the fuel cap is properly closed and tightened.
3. When traveling long distances or on rugged terrain, drain the
fuel of the machine before transporting.
4. Tie down the machine securely on the transportation so that
it will not move or topple over.