Metrik Mobile Electronics MCD-797 - Manual (Page 5)

Page 11 Page 4
5. AUTO-STORAGE/PRESET MEMORY SCAN BUTTON
1) In radio mode, press it to perform all stations memory for 5 seconds each time, while memory
digital and frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will
seek station on current band, then write to the preset memories. When the auto-storage
operation is completed, it will automatically perform for 5 seconds each time. After finishing 1
loop of memory scan, it will listen to the first memory station in the current band.
2) In MMC/SD or USB mode, press A.P button repeatedly to select TRACK SEARCH or
DIRECTORY SEARCH mode.
In MP3 disc mode, press A.P button repeatedly to select TRACK SEARCH, FIRST
CHARACTER SEARCH or DIRECTORY SEARCH mode.
3) In TRACK SEARCH mode of MMC/SD, USB or MP3 disc, the LCD will display MP3/T 000
and flash the biggest digit 0 that the MMC/SD card, USB bar or MP3 disc contain.
Then rotate the VOL knob to select the number of the flashing digit from 0 ~ 9. Then press
SEL button to confirm the number and flash next smaller digit 0. With the same means, select
the number of the flashing digit. After finishing selecting the number of all flashing digit, press
SEL button to play the track of the selected serial number.
In FIRST CHARACTER SEARCH mode of MP3 disc, the LCD will display A--......, If there are
files names its first character are A , the ......is the first file name its first character is A by the
order of A~Z and 0~9; otherwise, the ......is NONE. Rotate the VOL knob to select file s first
character by the order of A~Z and 0~9. Then press >>| or |<< button to select one file its first
characters is the selected one. Finally press SEL button to play the selected file.
In DIRECTORY SEARCH mode of MMC/SD, USB or MP3 disc, the LCD will display the
root folder(if there is not the root folder, it will found a root folder named ROOT).
Then rotate the VOL knob to select your desired folder and then press >>| or |<< button to select
your desired track in the folder. Finally press SEL button to play the selected track.
6. BAND BUTTON
Press the BND button briefly to select the radio broadcasting band you would like to hear.
The AM/FM band is toggled cyclically through the tuning bands
->FM 1-> FM 2 -> FM 3 -> AM 1->AM 2 ->.
In MP3 disc mode, if you press BND button repeatedly, the file name, folder name, song s title,
artist and album information will be scrolling on the LCD display.
As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0
/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they
will not.
In CD & MP3 mixed-formatted disc playback mode, pressing the BND button for more than 2
seconds will change between the playing the CD and MP3 formatted songs.
In a default mode, the unit will first play all the CD formatted songs and than play the MP3
formatted songs.
7. LOUDNESS BUTTON
When press shortly, the LOUD mode is turned on, its to enhance the bass sound effect when
the volume level is low. Press again to cancel the loudness effect.
8. LOCAL/DISTANCE BUTTON
Radio station search mode is divided by this LOC/DX switch, this button can be used to control
an attenuator in the tuner during search. The detecting level of seek, scan, auto-memory will be
reduced as much as the attenuated level of the tuner. In radio mode, press the LOC button to
change local reception or distance reception. (Note: This button is only for FM reception. )
PRECAUTION OF DISC PLAY:
Cleaning the CD:
Before playing a CD, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc in the direction of the arrow.
Always insert the CD with the label side facing upwards.
If the CD is inserted with the printed side facing downwards, the device may be
damaged.
Note: If there is already a CD in the CD slot, do not try to insert a second CD.
This may damage the device.
Always hold CDs by the edge. In order to keep the CD clean do not touch the surface.
Pull out the CD as shown below.
Do not attach any sticker or adhesive tape on the CD.
Do not expose the CD to direct sunlight or sources of heat such as heating vents.
Do not leave CDs in a car if it is parked in direct sunlight as that will lead to a con-
siderable rise in the temperature inside the car.
Note: Do not use any solvents such as petrol or thinning agents.
Commercially available cleaning substances or antistatic spray. This will damage
the device.