Philips Magnavox MWD2206A - Manual (Page 10)

Setup
– 10 – EN
STANDBY-ON
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
RECORD
MENU
SETUP TOP MENU
MODE ZOOM
SUBTITLE T-SET ANGLE
ENTER
RETURN
SEARCH
MODE
REPEAT A-B
OPEN/CLOSE
/EJECT SPEED AUDIO
CLEAR/
C. RESET
1 2 3
4 5 6
7 8 9
0 +10
Installing the Batteries for
the Remote Control
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
Keep in mind the following when using
the remote control:
• Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 2 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 0°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (m) within 0°
Remote Control
2
1
3
2
1
3
2
1
3
2 3
1
Hint
• Do not mix alkaline and manganese bat-
teries.
• Do not mix old and new batteries.
DVD mode VCR mode
1 2 3
4 5 6
7 8 9
0 +10
• To select chapter or title
directly.
• To select track directly.
• To select channel.
• The +10 button has no
effect in VCR mode.
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To search forward/backward
through a disc.
• To forward/backward a tape.
A-B • To repeat between your
chosen point A and B.
• To repeat between your cho-
sen point A and B.
ANGLE • To select camera angles on
a disc.
AUDIO • To select audio languages
on a disc.
• To select STEREO,
L-ch or R-ch.
CLEAR/
C. RESET
• To clear the markers.
• To clear the numbers
entered incorrectly.
• To cancel the point for A-B
repeat.
• To clear the markers.
• To remove status number in
program input.
• To clear the numbers
entered incorrectly.
• To cancel the point for A-B
repeat.
• To exit the VCR Menu.
• To reset the tape counter.
DISPLAY • To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
DVD
• To select the DVD output mode.
• To activate the remote
control in DVD mode.
• To select the DVD output mode.
• To activate the remote
control in DVD mode.
ENTER • To move the cursor and
determine its position.
• To move the cursor and
determine its position.
• To select an item
on the VCR Menu.
• To advance to the
next VCR Menu.
• To go back one
step during clock
and timer setting.
MENU
• To call up the Menu on a disc. • To call up the VCR Menu.
MODE
• To set black level on/off.
• To set virtual surround
on/off.
• To arrange the playing order
or play randomly.
• To set virtual surround on/off.
OPEN/CLOSE
/EJECT • To open or close the disc
tray.
• To open or close the disc
tray.
• To eject the video
cassette from the VCR.
PAUSE
• To pause disc playback.
• To advance playback one
frame at a time.
• To pause disc playback.
• To pause tape playback or
recording.
• To advance playback one
frame at a time.
PLAY
• To begin disc playback. • To begin disc playback. • To begin tape playback.
RECORD • To start a recording or One
Touch Recording.
REPEAT • To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.
RETURN • To return to the previous
operation in menu.
• To return to the previous
operation in menu.
SEARCH
MODE
• To search chapter, title or
time.
• To set or search the markers.
• To search track.
• To search time.
• To set or search the markers.
• To call up the index or time
search menu.
SETUP • To call up the DVD setup
menu.
• To call up the DVD setup
menu.
SKIP/CH. SKIP/CH.
• To skip chapters or titles. • To skip tracks.
• To change channels.
• To adjust the tracking
manually during playback.
SLOW • To view the tape in slow
motion.
SPEED • To select the recording
speed.
STANDBY-ON
• To turn the unit on/off. • To turn the unit on/off. • To turn the unit on/off.
STOP • To stop playback. • To stop playback.
• To stop playback or
recording.
SUBTITLE
T-SET • To select subtitles on a disc.
• To put the VCR into standby
mode for a Timer Recording.
TOP MENU • To call up the Top Menu on
a disc.
VCR
• To select the VCR output mode.
• To activate the remote
control in VCR mode.
VCR/TV • To select DVD position or
TV position.
• To select CD position or TV
position.
• To select VCR position or
TV position.
ZOOM • To magnify part of a picture.
(x2/x4)
Button
(Alphabetical order)
Disc/Tape
MWD2206A_H986NUD.indd 10 2006/01/18 18:9:0