Philips Magnavox MWD2206A - Manual (Page 12)

VCR
Functions
– 12 – EN
1 Press [MENU], then select “TIMER PROGRAMMING”.
2 Select an empty program number.
Then press
[B] to go to next step.
3 Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
Then press
[B] to go to next step.
2 Press [B] to set
“AUTO REPEAT”, “ON” or “OFF”.
4 Select the desired date.
Then press
[B] to go to next step.
5
Select the desired start time (hour) .
Then press [B] to go to next step.
1
Insert a cassette with
tab into this unit.
2
Select the channel
to record.
3
Press [SPEED] to select the desired tape speed.
4
Press [RECORD] repeatedly to select the
desired recording length.
5
To stop recording
6
To eject the
recorded cassette
• You can set a program one year in advance.
Recording
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on
it later, cover the hole with adhesive tape.
SP
REC
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hours 6hours 8hours
Recording/Playback Time Tape Speed
1 2 3
4 5 6
7 8 9
0
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR(8:00) OTR(7:30)
PLAY
STOP
OPEN/CLOSE
/EJECT
STANDBY-ON
POWER ON
VIDEO AUDIO REW F.FWD STOP/EJECT PLAY RECORD CHANNEL SOURCE
VCR
OPEN/CLOSE
DVD
PREV STOP
DISC IN PLAY
PLAY NEXT
REC TIMER REC
IR
STANDBY-ON
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
RECORD
MENU
SETUP TOP MENU
MODE ZOOM
SUBTITLE T-SET ANGLE
ENTER
RETURN
SEARCH MODE
REPEAT A-B
OPEN/CLOSE
/EJECT SPEED AUDIO
CLEAR/ C. RESET
1 2 3
4 5 6
7 8 9
0 +10
1
5 6
6
5
3
4
SKIP/CH.
You CAN NOT dub a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press [PAUSE F].
• During the rec-pause mode, five C marks appear on the TV screen. Each C
mark represents one minute.
• Press it again to resume recording.
• Pause mode will be automatically cancelled after 5 minutes to prevent damage
to the tape and the video head.
Recording & OTR (One Touch Recording)
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
Auto Repeat
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
or
PROGRAM NUMBER 1
DATE
– – / – –
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Timer Recording
Hint
• If you want to watch one channel while recording another...
1) Press
[VCR/TV] to put the unit in TV position.
2) Select a channel you want to watch with the cable box or the satellite box.
SPEED
RECORD
MENU
or
or
TIMER PROGRAMMING
PROG
1245678
DATE
START TIME
END
TIME
CHANNEL
REC SPEED
1 Press [MENU], and choose
“AUTO REPEAT” during playback.
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
MENU
or
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2  MON
START TIME 0 7 :  0 – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
or
or
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 2  MON
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Before: Turn on the TV and set it to channel .
• If channel  has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
VCR
VCR
VCR
• Insert a tape with its record tab into the unit.
4
2
or
or
Available program number flashes.
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
Record tab
MWD2206A_H986NUD.indd 12 2006/01/18 18:9:2