Philips Magnavox DV225MG9 - Manual (Page 21)

D
VD
F
U
N
CT
IO
N
S
EN
– 21 –
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
B
AUDIO Setting
Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 20.
C
4
Select the desired item.
SETUP AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
ON
BITSTREAM
5
Note:
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear
on the top and bottom of the
TV screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a wide-
screen TV is connected to
this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it
automatically selects the
best resolution setting
(“FRAME” or “FIELD”) based
on the data characteristics of
the pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
“frame”, which consists of
two separate images called
as “field”.
• Some pictures may be
blurred if you select “AUTO”
in the still mode due to their
data characteristics.
4
Select the desired item.
DISPLAY menu
AUDIO menu
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE OFF
STILL MODE:
(Default: AUTO)
See note on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
OFF
ON
BITSTREAM
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
Note:
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing back a 96kHz
disc with the copyright
protection, or when virtual
surround is set to “1” or “2”,
the sound will be down
sampled at 48kHz even if the
“DOWN SAMPLING” is set to
“OFF”.
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
SETUP DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE 4:3 LETTER BOX
AUTO
OFF
or
or
6
To exit the menu
Select the
desired
setting.
or
Select the
desired
setting.
or
Note:
PROGRESSIVE:
• You can set “PROGRESSIVE” to
“OFF” in “DISPLAY” menu or press
and hold [PLAY B] on this unit
on the DVD side for more than
5 seconds during playback until
the P-SCAN indicator on this unit
turns off.
• When “PROGRESSIVE” is “ON”,
video signals from the unit’s
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not be
output at all.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF 4:3 LETTER BOX
AUTO
ON SETUP
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Activate Progressive?
SELECT: K / L SET:OK
NO
YES
NO
YES NO
YES
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
SELECT: K / L SET:OK
Select “Yes”.
If there is no picture
or you do not press
any buttons for 15
seconds, “PROGRES-
SIVE” will switch to
“OFF” and it will exit
“SETUP” menu.
or
or
PROGRESSIVE: QUICK
(Default: OFF)
See note on the left.
6
To exit “TV ASPECT” or “STILL
MODE” menu
To complete
“PROGRESSIVE” setting
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used, and they
are accompanied with QUICK .
You can make all settings in
“CUSTOM” menu.
SETUP
SETUP
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used, and they
are accompanied with QUICK .
You can make all settings in
“CUSTOM” menu.
E8E62UD-DV225MG9.indd 21 E8E62UD-DV225MG9.indd 21 2008/02/01 11:46:55 2008/02/01 11:46:55