Philips Magnavox DV225MG9 - Manual (Page 7)

SETUP
EN
– 7 –
Playing 2 Channel Analog Audio Playing Multi Channel Digital Audio
AUDIO OUT DIGITAL AUDIO OUT
SETUP > QUICK >
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
BITSTREAM
Connecting to other device (an MD deck
or DAT deck etc.) without Dolby Digital
decoder.
PCM
Connection to an Audio System
* To complete these settings, refer to pages 20-21.
Note:
• The audio source on a disc in a Dolby Digital multi channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can enjoy
high-quality Dolby Digital multi channel surround sound as heard in the
movie theaters.
• Playing back a DVD using incorrect settings may generate noise distor-
tion and may also damage the speakers.
Connection to an External Tuner
Using the unit with an external tuner
1. Connect RCA audio and video cables to the audio and video
output jacks of your external tuner and to the audio and video
input jacks at the rear of the unit.
2. Press [INPUT] on your remote control until “L1” is displayed on
your TV.
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD VCR DVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L Y
R
AUDIO IN
L
R
R
AUDIO IN
VIDEO IN
L R
CB / PB
CR/ PR
AUDIO IN
VIDEO IN
VCR DVD/VCR
AUDIO OUT
L
VIDEO OUT
R
L
R
VIDEO IN
AUDIO IN
L
R
AUDIO OUT
VIDEO OUT
L
R
Audio
This unit
RCA audio cable
RCA video cable
RCA audio cable
RCA video cable
rear of TV rear of the unit
external tuner
(cable/satellite box)
L1: Rear panel terminals
L2: Front panel terminals
Refer to “Front & Rear Terminals” on page 9 for more information.
L1
Note:
• Your cable/satellite box can be accessed only by connecting it to L1
(rear panel jacks) of the unit. Even if the unit is turned off, the signal
from the external tuner is output to the TV through the unit.
Connection
Setting
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
Special note when connected to an external tuner:
• Only the active channel on your external tuner may be viewed or
recorded when connected to this unit.
Do not change channels during a recording. You cannot record
on channel while viewing another.
• Always use the LEFT (white) audio output jack from the external
tuner to ensure that the audio is mixed down correctly to mono
for this unit. If you use the RIGHT (red) jack, you will record the
right audio only.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your
local store.
L R
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD VCR DVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L Y
R
L
R R
CB / PB
CR/ PR
VCR AUDIO IN
VIDEO IN
L
R
DIGITAL AUDIO OUT
COAXIAL
VCR DVD/VCR
AUDIO OUT
L
R
AUDIO
OUT
DVD
L
R
analog audio
input jacks
RCA audio cable
digital audio
input jack
digital audio coaxial cable
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT VIDEO OUT
COAXIAL
stereo system
Dolby Digital decoder,
MD deck or DAT deck
or
E8E62UD-DV225MG9.indd 7 E8E62UD-DV225MG9.indd 7 2008/02/13 16:27:45 2008/02/13 16:27:45