Miller Electric Deltaweld Series - Manual (Page 3)

3
Genuine Miller Options
Digital Meter #186 498 Field
Dual-function, back-lit LCD digital meter
with selector switch. The digital meter
allows the wire feed speed to be preset in
meters per minute or inches per minute.
The voltage function will only monitor and
display the arc voltage. The voltage display
can also be calibrated if required. Preflow/Postflow and Spot Control
#186 496 Field
Installs inside feeder under an easy access
hinged cover. Provides up to 5 seconds of
spot weld time and has adjustable timers
(0.25 to 5 sec.) for controlling gas flow
prior to arc initiation and after completion
of weld.
Option #1: Delta-Fab ™ System
Option #2: Delta-Fab ™ System Stationary Package
Option #3: Delta-Fab ™ System MIGRunner ® Package
Packages
Purchase running gear and MIG kit
separately.
Delta-Fab ™ System
#951 022 (230/460/575 V, 60 Hz)
Comes complete With:
Delta-Fab ™ power source
24A wire feeder
Bernard
® Q-Gun ™
Stationary display without running
gear/cylinder rack.
Delta-Fab ™ System Stationary Package
#951 233 (230/460/575 V, 60 Hz)
Comes complete With:
Delta-Fab ™ power source
24A wire feeder
Bernard
® Q-Gun ™
Industrial MIG 4/0 Kit:
Smith
® regulator/flowmeter with 10 ft
(3 m) gas hose, 10 ft (3 m) 4/0 feeder
weld cable with lugs, and 15 ft (4.6 m)
work cable with 600-amp C-clamp
MIGRunner system with factory-installed
running gear/cylinder rack.
Delta-Fab ™ System MIGRunner Package
#951 232 (230/460/575 V, 60 Hz)
Comes complete With:
Delta-Fab ™ power source
24A wire feeder
Bernard
® Q-Gun ™
Industrial MIG 4/0 Kit:
Smith
® regulator/flowmeter with 10 ft
(3 m) gas hose, 10 ft (3 m) 4/0 feeder
weld cable with lugs, and 15 ft (4.6 m)
work cable with 600-amp C-clamp
Factory installed running gear/cylinder
rack
NEW! MIG Power Source Solutions