Magic Chef MCO2212ARW - Manual (Page 35)

34
ROLLER GUIDE
GLASS TRAY
Glass Tray Roller Guide
1. The ROLLER GUIDE and oven floor should be
cleaned frequently to prevent excessive noise.
2. The ROLLER GUIDE MUST ALWAYS be used
for cooking together with the Glass Tray.
1. DO NOT operate the oven without the Glass
Tray in place.
2. DO NOT use any other Glass Tray with this
oven.
3. If Glass Tray is hot, ALLOW TO COOL before
cleaning or placing it in water.
4. DO NOT cook directly on the Glass Tray.
CARE A ND CLEANING
Keep your oven clean and sweet smelling. Opening the door a few minutes after cooking helps air out
the inside. An occasional through wiping a solution of baking soda and water keeps the inside fresh.
Don’t use sharp-edged utensils on your oven. The inside and outside oven walls can be scratched.
The control panel can be damaged.
BE CERTAIN POWER IS OFF BEFORE CLEANING ANY PART OF THIS OVEN.
How to Clean the Inside
Walls and floor. some spatters can be removed
with a paper towel, others may require a damp
cloth. Remove greasy spatters with a sudsy cloth,
then rinse with a damp cloth. Do not use abrasive
cleaners on oven walls. NEVER USE A
COMMERCIAL OVEN CLEANER ON ANY PART
OF YOUR MICROWAVE OVEN.
Door(inside). windos : Wipe up spatters daily and
wash when soiled with a damp cloth. Rinse
thoroughly and dry.
Metal and plastic parts on door : Wipe frequently
with a damp cloth to remove all soil. DO NOT USE
ABRASIVES, SUCH AS CLEANING POSDERS
OR STEEL AND PLASTIC PADS.
THEY WILL DAMAGE THE SURFACE.
How to Clean the Outside
Case. Clean the outside of your oven with soap
and damped cloth, rinse with a damp cloth and
then dry.
Wipe the window clean with a damp cloth.
Chrome trim is best wiped with a damp cloth and
then with a dry towel.
Control Panel. Wipe with a damp cloth. Dry
thoroughly. Do not use cleaning sprays, large
amounts of soap and water, a brasive or sharp
objects on the panel - they can damage it.
Door Surface. When cleaning surfaces of the door
and oven that come together on closing door, use
only mild, non-abrasive soaps or detergents
applied with a sponge or soft cloth.’
Power Cord. If the cord becomes soiled, unplug
and wash with a damp cloth. For stubborn spots,
sudsy water may used, but be certain to rinse with
a damp cloth and dry thoroughly before plugging
cord into outlet.