Motorola B801 - Manual (Page 44)

44 Using your Answering machine
8.2 Delete All Messages
1. Press and hold
q
on base to erase all read messages
(applicable only when messages in answering machine
are all read, new message(s) will not be deleted.)
8.3 Announcement
This is the message your callers hear on the answering
machine. There is only one pre-recorded outgoing
messages in Answer and Record mode, and you can record
your own.
Press and hold m to start recording the personalized
announcement of the current answer mode after hearing a
long beep. Release key to stop recording.
8.4 Memo
You could record your own message in the base answering
machine.
Press and hold
r to start recording a memo after hearing
a long beep. Release key to stop memo recording.
8.5 Set the answer delay
1. Press P when in idle mode to enter the feature menu.
2. Use , to scroll to >SETUP BS .
3. Press P and , to select >ANSWER DELAY .
4. Press P and , to select TOLL SAVER , 2 RINGS , 4 RINGS or
6 RINGS .
5. Press P to save your preference and return to the
feature menu.
NOTE
If Toll Saver setting is selected, the answering machine will
pick up after two rings if there are new messages and after
four rings if there are no messages.
r
Skip to play the next message.
q
Delete the current message.
u Increase the loudspeaker volume by one
level (1 to 8).
d Decrease the loudspeaker volume by one
level (1 to 8).