Motorola B801 - Manual (Page 48)

48 Help
telephone base manually to resume the connection, refer
to Section
3.2 “Bluetooth setup” for details.
I cannot find the Motorola B801/B802/B803/B804/
B805 on my mobile phone
• Make sure that the Bluetooth feature is turned on in the
telephone base. Carefully follow the setup instructions in
Section
3.2 “Bluetooth setup”.
• Make sure that you manually set your mobile phone to
find or search for devices.
• Remove the Motorola B801/B802/B803/B804/B805
from your mobile phone's Bluetooth device history list
(see your mobile phone user's manual for more
information).
• Turn off your mobile phone, and then turn it on again.
• Reset the telephone base. Unplug the unit’s electrical
power. Wait for approximately 15 seconds, then plug it
back in. Repeat the above suggestions.
My mobile phone is connected to the telephone
base, but I cannot make a CELLULAR call
• Make sure that your mobile phone is in idle mode when
you are trying to make a CELLULAR call.
• Make sure that your mobile phone is compatible.
• For some smart phones, make sure that the cellular
function is turned on.
Bluetooth System Busy appears on the display
• Make sure that your Bluetooth enabled mobile phone is
in idle mode when connected to the telephone base.
• Make sure that your Bluetooth enabled mobile phone is
not connected to any other Bluetooth device.
• The Motorola B801/B802/B803/B804/B805 can only
use one Bluetooth device at a time.
• The PIN code on the telephone base does not work.
• The default PIN code is 0000.
I cannot hear any sound on my telephone system
when on a CELLULAR call
• Reset the telephone base. Unplug the unit’s electrical
power. Wait for approximately 15 seconds, then plug it
back in.
• Turn off your mobile phone, and then turn it on again.
My phone doesn’t work at all
• Make sure the power cord is securely plugged in.
• Make sure that the battery connector is securely plugged
into the handset.