Setup features, Continued), Display priority – Magnadyne M1-CD User Manual
Page 29: Area radio frequency adjustment, Clock displayed when unit is turned off, 12 or 24 hour clock display
29
Setup Features
(Continued)
Display Priority:
1. Press and hold the VOLUME knob approxi-
mately 5 seconds until “BEEP ON” appears in
the display. Press the VOLUME knob repeated-
ly until “PRI SRC” appears in the display.
2. Rotate the VOLUME knob to adjust the display
priority: Clock priority (PRI CLK), No priority
(PRI NO) or Source priority (PRI SRC)
3. Wait 5 seconds, and the unit will return to last
display mode.
MUTE
EQ
MODE
DISPLAY
AS/PS
PTY
VOLUME
PUSH SEL/
MENU
DISC/DIR/CAT
AUX IN
TA
W-BAND
PUSH ENT/
BND/LOUD
S-MOD/
SCH/
IPOD MENU
TUNE/TRACK.CH
1
2
3
REPEAT
4
SHUFFLE
5
SCAN
6
Area Radio Frequency Adjustment:
1. Press and hold the VOLUME knob approxi-
mately 5 seconds until “BEEP ON” appears in
the display. Press the VOLUME knob two more
times until “AREA USA” in the display.
2. Rotate the VOLUME knob to adjust the area.
Note: If operating the unit in the USA do not
change the area.
3. Wait 5 seconds, and the unit will return to last
display mode.
Note: In EUR or OCE configuration the region
(REG) can be turned On and Off.
MUTE
EQ
MODE
DISPLAY
AS/PS
PTY
VOLUME
PUSH SEL/
MENU
DISC/DIR/CAT
AUX IN
TA
W-BAND
PUSH ENT/
BND/LOUD
S-MOD/
SCH/
IPOD MENU
TUNE/TRACK.CH
1
2
3
REPEAT
4
SHUFFLE
5
SCAN
6
Clock Displayed When Unit is Turned Off:
1. Press and hold the VOLUME knob approxi-
mately 5 seconds until “BEEP ON” appears in
the display. Press the VOLUME knob three
more times until “PCLK ON” in the display.
2. Rotate the VOLUME knob counterclockwise
for clock Off and clockwise for clock On.
3. Wait 5 seconds, and the unit will return to last
display mode.
MUTE
EQ
MODE
DISPLAY
AS/PS
PTY
VOLUME
PUSH SEL/
MENU
DISC/DIR/CAT
AUX IN
TA
W-BAND
PUSH ENT/
BND/LOUD
S-MOD/
SCH/
IPOD MENU
TUNE/TRACK.CH
1
2
3
REPEAT
4
SHUFFLE
5
SCAN
6
12 or 24 Hour Clock Display:
1. Press and hold the VOLUME knob approxi-
mately 5 seconds until “BEEP ON” appears in
the display. Press the VOLUME knob repeated-
ly until “HOURS 12” appears in the display.
2. Rotate the VOLUME knob to adjust the clock
display priority: “HOURS 12” or “HOURS 24”.
3. Wait 5 seconds, and the unit will return to last
display mode.
MUTE
EQ
MODE
DISPLAY
AS/PS
PTY
VOLUME
PUSH SEL/
MENU
DISC/DIR/CAT
AUX IN
TA
W-BAND
PUSH ENT/
BND/LOUD
S-MOD/
SCH/
IPOD MENU
TUNE/TRACK.CH
1
2
3
REPEAT
4
SHUFFLE
5
SCAN
6