Installation – Magnadyne M1-CD User Manual
Page 30
30
Step 1:
The radio chassis is designed to be “Sleeve Mounted” through a opening in the dashboard panel. The
required opening size is 182mm (7-3/16") x 84mm (3-5/16"). Cut or engage an opening in the dashboard to
accommodate the mounting sleeve.
Step 2:
Insert the mounting sleeve into the opening in the dashboard. Bend the metal tabs on the sleeve
to secure the mounting sleeve to the dashboard.
Step 3
: Bring all wiring for the connection of the unit (including the antenna) through the center of the
mounting sleeve.
Installation
Nut
Washer
Sheet Metal
Screw
Metal Strap
Dashboard
Mounting Sleeve
Removing the Unit:
To remove the radio after installation, insert the removal keys straight back until they click. Then pull the radio
out. Note: If the removal keys are inserted at an angle they will not release the radio.
Insert Removal
Keys Here
Insert Removal
Keys Here