Minicom Advanced Systems Switches - Manual (Page 8)

Supervisor Smart 2-port
O p e r a t i n g t h e S m a r t 2
To prepare the system for operation:
1. Connect the cables to the front panel.
2. Connect the cables to the back panel.
3. Switch on the computers.
Switching between computers
There are two ways to switch between computers.
1. Press the button on the front panel of the Smart 2.
2. On the keyboard, press the hotkey Shift then, + or -.
Release Shift, before pressing + or -.
Note! With a US English keyboard you can use the +/- key of
the alphanumeric section or of the numeric keypad. With a
Non-US English keyboard only use the +/- key of the numeric
keypad.
When switching computers the illuminated LED on the front
panel indicates which computer is currently being accessed.
7