Minicom Advanced Systems Switches - Manual (Page 9)

USER GUIDE
Scanning computers
The Smart 2 can scan the two connected computers at intervals
of between 1 and 99 seconds. The default time period is 0
seconds (disabled) – change this in the Settings mode see the
paragraph below. During scanning you cannot work on the
computers.
To scan computers:
Press the hotkey Shift then, S. Release Shift before pressing S.
The scan activates.
To end scanning:
Press Esc.
The Settings mode
Enter the Settings mode to:
• Set the scan time interval
• Change the hotkey
• Make advanced adjustments
• View settings
To enter the Settings mode:
Press Shift then, Tab. Release Shift before pressing Tab. All 3
keyboard LEDs glow when in the Settings mode.
8