Morphy Richards AD29112 - Manual (Page 12)

U UK K H He ellp plliin ne e 0 08 87 70 0 0 06 60 0 2 26 61 14 4 IIrre ella an nd d H He ellp plliin ne e 1 18 80 00 0 4 40 09 91 11 19 9 1 11 1
Equaliser and bass
boost
Press MENU button to enter the
main menu display then use
SKIP buttons to locate
Equalizer, press PLAY/PAUSE
button to confirm and again use
the SKIP buttons to scroll
among Flat, Custom, Jazz,
Rock, Classic, POP.
NOTE: Pressing PLAY/PAUSE
button when you have located
the item Custom will initiate a
two-option menu (User Bass &
User Treble) for you to choose
from. You may use the SKIP
buttons to choose and then
PLAY/PAUSE button to confirm
and again use the SKIP buttons
to make the adjustments in the
value of the Bass and Treble. You
may feel the change in Bass or
treble effect while doing the
adjustments.
EXTERNAL MEMORY
MEDIA OPERATION
(USB/MMC)
Prepare the player for
External memory
media operation
Insert an MP3 Player into the
USB mode.
An icon of READING shows in
the LCD and after the USB has
been successfully detected and
read, the track number as a
total shows in the LCD.
Press PLAY/PAUSE button to
begin playback from track
Number 1.
OR
Insert an MMC/SD card into the
card slot.
Press FUNCTION button
continuously until the player
enters MMC/SD mode.
NOTE: The player can
successfully play the music files
with USB 1.0 and 2.0 storage
devices.
NOTE: For Creative ZEN series,
user should enable the
removable disk function before
plug into the unit (Menu - Extras
- Removable disk)
Skipping tracks and
searching between
tracks
When in play mode. Press SKIP
+ button once to skip the
current track and play the next
track, press this button
continuously to go to
corresponding tracks ahead.
Press SKIP button once to skip
the current track and go back to
the beginning of this track,
press this button continuously
to go back to corresponding
tracks back.
When in play mode, press and
hold SKIP buttons to initiate
high-rate scanning between
tracks. Release one of them to
begin playback of music at
normal speed.
Repeat modes
Press REPEAT button once to
repeat the current track, the
LCD shows the icon for single
track repeat.
Press REPEAT button twice to
repeat tracks on stored on this
storage media (USB/MMC card)
as a whole. The LCD shows the
icon for all tracks repeat.
Press REPEAT button three
times to repeat the whole tracks
in the current directory, the LCD
shows the icon for all tracks in
the current directory.
Random play
Press RANDOM button once in
play or stop mode to activate
random playback immediately,
the player will pick up tracks in
a random sequence for
playback. You may press this
button once again to exit
random play mode and return to
normal playback.
Introscan play
29112 rev1 1/9/06 09:40 Page 12