Microtek MS4 User Manual
Page 31
Advertising
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
Press the Menu button to open the
Main menu.
2.
Press the cursor
button to move
to the Status menu.
3.
Press the cursor
button to move
down to Lamp Hour Reset.
4.
Press the
button.
A message screen appears.
5.
Press the cursor buttons in this order:
;
;
;
.
The Status menu appears again
showing the Lamp Hours reset to
zero.
Advertising