Motorola CP100 - Manual (Page 24)

T
a
lking a
nd Rece
ivin
g
18
Monitoring a Channel
Check for channel activity.
1. Press and hold
Q
. You will hear static if the channel is clear
and w 0 will display.
2. Press
Q
again to release.
Scanning (15 ch models only)
You can scan up to 15 channels and frequencies. When the radio detects activity, it
stops scanning and locks in on the active channel. This allows you to talk and listen
to the person transmitting without changing channels.
1. To start scanning, briefly press
J
. Your radio displays h and begins to scroll
through channels. When the radio detects channel activity, it stops on that
channel and displays the signal strength indicator and the channel. You can talk
to the person(s) transmitting without having to switch channels by pressing
M
. If
you press
M
while the radio is scanning, the radio transmits on the channel you
selected before you activated scan.
2. To stop scanning, briefly press J .
If no transmission occurs within five seconds, scanning resumes.
To scan a channel without interference eliminator codes, change the code for your set
channel to
0 before you press and release
J
.
Note: When you press
J
, you hear all traffic, but may not be able to transmit back
because the other person(s) may be using codes.
operation.fm Page 18 Monday, March 3, 2003 12:59 PM