Editing the scan list (15 ch models only), Cloning – Motorola CP100 User Manual
Page 32
Pr
og
ramming F
eatur
es
26
Editing the Scan List (15 ch models only)
To avoid hearing transmissions from unnecessary channels while scanning and to
decrease scan time, you can edit the scan list to skip unneeded channels.
1. Enter Programming Mode as necessary, refer to “Entering Programming Mode”
on page 20.
2. Press
\
until
h
displays and the channel and
Y
or
n
flashes.
3. Press
[
or
]
to increase or decrease the channel.
4. Press
J
to display either:
Y
to include the channel
n
to exclude the channel
5. Press and hold
M
to exit
k
.
Cloning
You can duplicate CP100 radio settings from one radio to another by using the
optional accessory NNTN4028 Multi-Unit Charger (MUC). Please refer to the MUC
User's Guide included with this accessory.
1. To enter the Programming Mode on the source radio, press and hold
MQ
for
three seconds while turning on your radio. The radio beeps and displays
k
.
2. Place the source radio in one of the front pockets of the MUC.
operation.fm Page 26 Monday, March 3, 2003 12:59 PM