Motorola PRO ENCORE User Manual

Page 2

Advertising
background image

5

Turning Your Pager Off

• Press

X

until the

pager off?

prompt displays.

• Press

W

to turn your pager off.

The pager displays the time and date, but not an alert mode
indicator. If the alarm is set, the alarm indicator

\

remains

on the screen when the pager is off.

Turning the Light On

• Press

V

to turn the light on.

• To turn the light off, press

V

again. The light turns off auto-

matically two seconds after returning to the standby
screen.

Changing Alert Modes

• Press

X

. Either

silent ?

or

au

d

io ?

displays,

depending on the current mode.

• If

au

d

io ?

displays, then the pager is in “Silent” mode.

Press

W

to change to “Audio” mode. The pager chirps.

• If

silent ?

displays, then the pager is in “Audio” mode.

Press

W

to change to “Silent” mode. The pager vibrates.

For your pager to vibrate when a message is received, it
must be in “Silent” mode.

Selecting an Audible Alert

• Press

X

until

set alert ?

displays.

• Press

W

again and the current alert number displays, for

example:

alert 3

, and the pager gives a sample of the

alert tone.

• Press

X

until the desired alert type displays. As each alert

number displays, the pager gives a sample of the alert
tone.

• Press

W

to select the alert number, set the alert tone to

be used, and return to the standby screen. When mes-
sages are received, your pager gives the selected alert
only when in the audio mode

D

.

6

Setting the Time

• Press

X

until

set time ?

displays.

• Press

W

to set the time. The hour flashes.

• Press

X

to change the hour. Press

W

to switch to the

minutes. The first digit of the minutes flashes.

• Press

X

to change the first minute digit. Press

W

to

switch to the second digit. The second digit of the minutes
flashes.

• Press

X

to change the second minute digit. Press

W

to

switch to AM/PM. The

a

or

p

flashes.

• Press

X

to change AM/PM.

• Press

V

twice to return to the standby screen.

Setting the Alarm

• Press

X

until

set alarm ?

displays.

• Press

W

to select the alarm on/off sequence.

on

or

off

flashes.

• Press

X

to turn the alarm on or off. Press

W

to switch to

the hours. The hour flashes.

• Press

X

to change the hour. Press

W

to switch to the

minutes. The first digit of the minutes flashes.

• Press

X

to change the first minute digit. Press

W

to

switch to the second digit. The second digit of the minutes
flashes.

• Press

X

to change the second minute digit. Press

W

to

switch to AM/PM. The

a

or

p

flashes.

• Press

X

to change AM/PM.

• Press

V

twice to return to the standby screen.

The

\

displays when the alarm is turned on. The pager

vibrates or gives a 20-second alert and

alarm

displays at

the selected time.

If set, the alarm activates even when the pager is off.

• Press any button to stop the alarm alert.

7

Setting the Date

• Press

X

until

set

d

ate ?

displays.

• Press

W

to set the date in your pager. The month flashes.

• Press

X

until the desired month displays. Press

W

to

switch to the day. The day flashes.

• Press

X

until the desired day displays. Press

W

to

repeat setting the date, if needed.

• Press

V

twice to return to the standby screen.

Saving Messages

• To save a message, press

X

while reading your mes-

sage. The prompt

protect ?

displays.

• Press

W

to protect the message.

• A

=

indicates that your message is saved.

• Press

X

while reading the saved message to remove the

protection. The prompt

unprotect ?

displays.

• Press

W

to remove the protection.

• The

=

is removed from the screen.

Saved messages cannot be erased or overwritten by new
messages when the memory is full. You can save up to eight
messages.

Erasing Messages

• Press

X

until

erase all?

displays.

• Press

W

. Your read, unprotected messages are erased.

The pager returns to the standby screen.

The

erase all?

prompt displays only if there are read

messages in memory.

8

Selective Erase of Messages

• Press

X

twice while reading a message and the

d

elete ?

prompt displays.

• Press

W

to delete the message and return to the standby

screen.

Only unprotected messages can be deleted.

Effective Use of Your

PRO

ENCORE! Pager

Your

PRO

ENCORE! pager can help you keep in contact

with everyone important to you. . . children or child care
providers, business office, data services, and voice mail. Be
sure that your children’s school, physician, and friends have
the number to contact you in emergencies.

Give your pager number to family, friends, and associates
to assure contact at any time, any place. When they call your
pager number, they enter the number where they can be
reached on a tone-type telephone. This number is then
displayed on your

PRO

ENCORE! pager.

If you have a cellular phone, give your pager number instead
of your cellular number. Then you can decide who to call
back, without paying for incoming cellular calls. Your

PRO

ENCORE!

pager can help reduce your monthly

cellular phone bill!

Battery Information

Your

PRO

ENCORE!

pager is designed to operate with an

AAA-size alkaline battery. See diagram on page 2 for the
battery door location. If detached from the pager, the hinged
battery door can be easily snapped back into place.

Advertising