3. mode control, See section 3-3) – Miller Electric Digital Elitet User Manual
Page 7
OM-234 388 Page 5
3-3. Mode Control
1
Mode Control Button
Press button to select the mode ap-
propriate for the work activity:
Weld Mode − used for most welding
applications. In this mode the lens
turns on when it optically senses a
welding arc. Adjust shade, sensitivity,
and delay settings as needed.
Cutting Mode − used for cutting ap-
plications. In this mode the lens turns
on when it optically senses a cutting
arc. Adjust shade, sensitivity, and
delay settings as needed.
Grind Mode − used for metal grinding
applications. In this mode the shade is
fixed shade No. 3. No lens adjust-
ments are possible.
X Mode − used for outdoor or low cur-
rent welding applications. In this mode
the lens turns on when it senses weld
current. Adjust shade, sensitivity, and
delay settings as needed.
.
Nearby welding may affect hel-
met operation when lens is in X
Mode. Stay at least 12 ft (3.7 m)
away from other welding activity.
1
805 010