Motorola BALI - Manual (Page 16)

14 Basics
2 Scroll to My Pictures , My Videos , or My Sounds , and
press . If necessary, scroll to the name of a folder
and press .
3 To move a single file, scroll to the file and press
Options , then scroll to Move and press .
To move more than one file, press Options , then
scroll to Move Multiple and press . Scroll to each
file you want to move and press to mark it, then
press Done .
Note: Files that were preloaded on your phone can’t
be moved.
4 On the Move To screen, scroll to the destination for
the moved file(s) and press .
5 When prompted to confirm the move, select Yes
and press .
Use TTY device with phone
Note: Network/Service dependent.
You can use an optional TTY device with your phone to
send and receive calls. You must plug the TTY device
into the phone’s headset jack and set the phone to
operate in one of three TTY modes.
Use a TSB-121 compliant cable (provided by the TTY
device manufacturer) to connect the TTY device to the
phone.
Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as needed to
minimize errors.
For optimal performance, your phone should be at
least 12 inches (30 centimeters) from the TTY device.
Placing the phone too close to the device may cause
high error rates.
ù When you set your phone to a TTY mode, it
operates in that mode whenever the TTY device is
connected.
Find it: > u Settings > Call
1 Scroll to TTY Setup and press .
2 Scroll to one of the following TTY Setup options and
press .
option
Voice Set to standard voice mode.
TTY Transmit and receive TTY
characters.
VCO Receive TTY characters but
transmit by speaking into phone
microphone.
HCO Transmit TTY characters but receive
by listening to phone earpiece.