Moxa Technologies UPORT 1110 - Manual (Page 22)

UPort 1110 and 1130 User’s Manual Installation and Configuration
2-15
Removing the Adaptor
The adaptor is a plug and play device. No special procedures are required to remove the adaptor;
you may simply pull the adaptor out of the USB port. You should verify that no data is being
transmitted before removing the adaptor.
Removing the adaptor does not remove the drivers. The drivers remain in place so that the adaptor
can be automatically detected and installed if it is pluged back into the USB port.
The adaptor can also be uninstalled through the Device Manager, the same as other Windows
devices. Right-click the adaptor, which will be found under Multi-port serial adaptors, then
select Uninstall from the context menu.