Mazda 2009 Tribute HEV - Manual (Page 88)

2. Slide the cross-bar to the end of
the rail.
3. Use a long, flat object to
depress the tongue in the
endcaps on both sides of the
cross-bar.
4. Slide the cross-bar assembly off
the end of the rail.
To reinstall the cross-bar assembly (if equipped) to the roof rack
side rails:
1. Ensure that both cross-bar
assemblies are installed with the
F (front) arrow facing towards
the front of the vehicle.
2. Use a long, flat object to
depress the tongue in the
endcaps on both sides of the
cross-bar.
3. Slide the cross-bar assemblies
over the end cap tongue and
into the side rails.
2009 Tribute Hybrid (thv)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
88