Miele CS1411 - Manual (Page 7)

Cleaning the appliance
^ Remove any protective packaging or
labels.
^ Make sure the drain valve is closed.
^ Fill the reservoir with approximately
1 gallon (4 l) of water and add a
small amount of dish soap. Make
sure the water level is no higher than
the maximum level marked on the
rear of the reservoir.
^ Turn the control knob clockwise to
275°F (130°C) and bring the water to
a boil.
^ Once the water starts to boil, turn off
the fryer by turning the control knob
counterclockwise to "0". Allow the
water to cool to a safe temperature
before draining. Empty the water into
a heat resistant container by slowly
opening the drain valve by turning it
counterclockwise (see "After using
the fryer").
^ Rinse the reservoir thoroughly with
hot water.
^ Close the drain valve by turning it
clockwise, raise the heating element,
and dry the reservoir with a clean
cloth.
^ Clean the other surfaces of the
appliance with a damp cloth and dry
with a soft cloth.
Heating the appliance
Metal components of the appliance
have a protective coating which may
give off a slight odor the first time the
appliance is heated.
The smell will dissipate after a short
time and does not indicate a faulty
connection or appliance defect.
Before using for the first time
7