Minolta CF911PE - Manual (Page 24)

2-6
G
ett
in
g to
K
n
o
w
Y
o
ur
P
ri
n
te
r
Ch
a
p
te
r 2
CF911PE Operator’s Manual
3. Turning ON and OFF
Turning ON and OFF
• Turning the printer ON
Press the Power Switch to the (ON) position.
• Turning the printer OFF
Press the Power Switch to the (OFF) position.
When the unit is turned ON
The printer icon on the print station manager screen changes as follows when the power is turned ON.
(1) While the printer self-test operation and warm-up, off-line, printer busy, printer in sleep are per-
formed automatically, the indicator will turn yellow.
(2) If a printer system error occurs, the indicator will turn red.
(3) When the printer enters the print-ready mode, the indicator will turn green.
However, the printing operation cannot be performed even if data from the computer is sent at this time.
A warm-up time of approximately nine minutes (at a room temperature of 20ºC (68ºF)) is required before
printing can be performed.
NOTE
If the fusing temperature drops excessively during a multi-print cycle, there is a possibility that the
printing speed will be reduced. The printing speed will automatically return to normal when the fusing
temperature rises enough to ensure good fusing performance.
C4119O010AA
*Click the this icon, displayed Error Messages on the screen
of printer driver summary.
*Red + stripe is power off of the CF911PE.
*Dark green is power off of the PrintLink, or the unconnct the
interface cable.