Minolta CF911PE User Manual
Page 33
4-5
2. When the Message “Toner Near Empty” or “No XX Toner.” Appears
W
h
en
a M
e
ss
age
Appe
ars
Ch
a
p
ter
4
CF911PE Operator’s Manual
Remove the bottle cap and peel off the seal.
Open the Toner Hopper Lid.
NOTE
Make absolutely certain that the color of the
toner matches the color of the Toner Hopper Lid.
Align the tab on the Bottle with the cutout in
the Toner Receptacle and turn the Bottle
clockwise until it stops.
After the toner stops falling in (approx. 60
seconds), tap the Bottle a few times to
ensure that all the toner falls into the Hopper.
Making sure that the toner has emptied
completely, turn the Bottle counterclockwise
and lift it out of the Receptacle. Close the
Toner Hopper Lid.
NOTE
Please wait for a while after the toner has fallen
in completely. If not, toner powder may be blown
up from the Toner Hopper.
Slide the Toner Hopper Unit back in and
close the Front Door.
Use the same procedure to add toner for the
other three Main Hoppers.
5
1144L016AA
6
1144L014AA
7
1144L017AA
8
1144L018AA
9
1144L019AA
10
1144L020AA
11