Memorex MVD-2037 O/M.QXD - Manual (Page 11)

11
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A TV USING THE HDMI OUTPUT JACK
NOTES:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component, S-
Video or Video OUT jack on the player.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• When using HDMI as your source, setup the HD resolution in the Video menu as described on page 18 and the Digital Output
in the Audio menu as described on page 19.
• The player’s video output will automatically change to HDMI when the HDMI cable is connected and the power is on.
• When you connect the HDMI cable to a TV for the first time, the HMDI output resolution will be automatically set to the highest
provided by the TV.